HGLRC F4 V6 PRO Flight Controller 5.8GHz 48CH 0/25/100/200/400/600mW 48CH switchable transmitter w/ 5V BEC OSD PDB
Specifications: (User Manual)
1.HGLRC F4 V6 PRO FC 5.8GHz 48ch switchable VTX
CPU: STM32F405RGT6 , dual open 8K
Built-in 5V/3A BEC output
Direct welding ESC PDB
Built-in current sensor
Black box FLASH 16M large capacity storage
Input voltage: 2-6S
Board thickness: 1.6MM
copper foil thickness: 2OZ * 8
Maximum current: 200A
FPV Transmitter: 0/25/100/200/400/600mW 48CH switchable transmitter
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
Hole mounting size: M3 30.5 * 30.5mm
Note: The antenna must be connected before power on.
Built-in BETAFLIGHT OSD to achieve remote control PID parameters
Buzzer / programming LED / voltage monitoring / BLHELI-S ESC program
Please read the cautions as follows, otherwise stability of your flight controller cannot be ensured, your flight controller will even get damaged.
● Keep focus on the polarity. Check carefully before power supply.
● Cut off the power when you connect, plug and pull anything.
● Don't connect 5V or electrical power interfaces, otherwise your flight
controller will catch fire.
● The refresh rate of PID and Gyroscope is up to 8K.
2.HGLRC Forward FD50A BLHeli_32 50A 2-6s Dshot 1200 ESC
*3-layer PCB board
*3 ways of Current Shunt
*Single circuit current only pass single layer.
*to protect esc board to avoid overheat and overcurrent.
*Support 2-6S Lipo battery
*Support 22xx，23xx，24xx series motor
*Suitable for Narrow arm frame Drone
*Suitable for 5-7 inches quad
Perfect for professional FPV racing.
- Input Voltage: 2-6S Lipo battery
- Constant Current: 50A
- Peak Current: 60A
- BEC Ouput: NO
- Firmware: BLHELI_32
- Size: 42x10x6.4mm
- Weight: 5.2g
- MOS Tube: TOP QUALITY MOSFET
- Protocol:DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot
1x F4 V6 PRO flight controller