0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total

    Note: Power supply adapter if required to work with this charger. Please make sure you have suitable adapter or get one here

     

    The Toolkit RC M6 is a small 150w color screen charger! At heart, the M6 is a small and compact charger that boasts a wide array of other features not found in chargers on the market. Additional functionality includes a servo tester, battery cell checker, wattmeter (power meter), PWM/PPM/S.Bus input testers (for receiver testing), as well as output generators that offer variable voltage and amperage with DC current. 

    Get XT60 to XT30 adapter cable here

    Toolkit M6 Features

    • Battery Charger
    • Cell Checker
    • Servo Tester
    • PWM,PPM, S.Bus Input/output & Receiver tester
    • Viable AMP/Volt DC Power supply (Requires external DC input)

    Charger Features

    • Lithium battery cut-off voltage can be set (TVC function)
    • Measure battery voltage, internal resistance, balance
    • Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
    • Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
    • The customizable 1-28V constant output voltage, 1-10A constant output current
    • Multi-language optional
    • USB 2.1A@5.0V Output (Mobile device charging)
    • U-disk firmware upgrade (Slave device)

    Charger:

    Input voltage: 7.0-28V
    Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
    Charge power: 150W / Up to 10A
    Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
    USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
    Dimensions: 68x49x26mm
    Weight: 80g
    LCD: 1.8inch TFT RGB, 160x128 Pixel

    Measurement:

    PWM: 880-2200us @ 20-400Hz
    PPM: 880-2200us*8CH @ 20-50Hz
    SBUS: 880-2200us*16CH @ 20-100Hz
    Voltage: 1.0-5.0V @ 1-6S
    IR: 10-99mR @ 1-6S

    Output:

    PWM: 500-2500us @ 20-1000Hz
    PPM: 880-2200us*8CH @ 50Hz
    SBUS: 880-2200us*16CH @ 74Hz
    Power: 1-10A @ 1-28V Mode:CC+CV

    User Manual & Firmware

    Error Codes

    1.over current
    2.overvoltage
    3.over temperature
    4.timeout
    5.battery is invalid
    6.input low
    7.input is too high
    8.balance is complete
    9.is not connected to the balance port
    10.not connected to the main port
    11.timeout
    12.types do not match
    13.cells error
    14.battery needs to be balanced
    15.This mode is not rechargeable

    Note: This product is NOT eligible for free shipping.


    People who bought this product, also bought

    
    x
    x