Highlights:
* Structural Design: Brand-new spherical design with a fully protected fuselage. Made of high-strength PC material, it's heat-resistant and oxidation-resistant, and its high-toughness effectively cushions impacts.
* ELRS+LED+Buzzer AIO Board: Adjustable 8-color LED lighting. You can adjust the circle light color (yellow, green, cyan, red, purple, blue, white, and orange), light brightness (1 - off, 2 - 10% brightness, 3 - 30% brightness, 4 - 60% brightness, 5 - 100% brightness), and light type (steady light, breathing light, running light, and rapid flashing).
* Tail Light: When the drone battery is low, the tail light will flash synchronously to warn. This mode links the LED color to the remaining battery capacity. It lights green at 4.2V, yellow at 3.8V, and flashes red at 3.4V. (If the voltage is below 3.6V, the LED will flash slowly and the buzzer will sound; if the voltage is below 3.4V, the LED will flash quickly and the buzzer will sound quickly.)
* New plug design: Fixed XT30 power plug prevents the plug and power cord from shaking, reducing the risk of the power cord being hit by the propeller.
* F405 flight controller: Using the high-performance open-source F405 flight controller, you can customize the flight feel and operation settings to your liking.
Drone Parameters:
FC and ESC: HGLRC F405 25A V1 AIO
Brushless Motor: 1303.5 5500kV (3s)
Propellers: GEMFAN 2820 3-blade propellers
Signal Transmission: 2.4GHz
Color:Red/ Blue
Wheelbase: 112mm
Frame External Dimensions: 135mm*135mm
Drone External Dimensions: 200mm*200mm*180mm
Drone Weight: 151g ± 5g
FC and ESC: HGLRC F405 25A V1 AIO
Brushless Motor: 1404 4800kV (4S)
Propellers: GEMFAN 2820 3-blade propellers
Signal Transmission: 2.4GHz
Color: Red/ Blue
Wheelbase: 112mm
Frame Dimensions: 135mm*135mm
Drone Dimensions: 200mm*200mm*180mm
Drone Weight: 162g ±5g
Shipping List:
1* HGLRC D200 Soccer Drone | (3s/4s)
3* Battery Strap
1* Multi-Function Screwdriver
4* GEMFAN 2820 Three-Blade Propeller
6* ST1.6*8 Self-Tapping Screws
4* Self-Locking M2 Nuts
4* Cup-Head M2*10 Screws
1* Manual
5* loop of the Velcro
1* HGLRC Sticker
1* Steering Card
