LED Strip Parameters:
Following the long-standing popularity of the HGLRC W554B LED strip in the FPV community, HGLRC now introduces an upgraded series:
38mm/25mm strips use smaller RGB 2020 packaged LEDs for extreme miniaturization.
The 13mm strip uses even smaller RGB 1010 packaged LEDs for extreme miniaturization.
All strips support plug-in or soldered connections for easy replacement/maintenance.
Three distinct sizes are available, each with advantages:
38mm Size: Lightweight design; Each strip carries 12 LEDs; Only 4 strips easily meet competition requirements (48 LEDs total); Features RGB LEDs programmable via flight controller/HGLRC W2812 LED controller for custom color effects^.
25mm Size: Lightweight design; Each strip carries 4 LEDs; Requires 8 strips to meet competition requirements (32 LEDs total); Features RGB LEDs programmable via flight controller/HGLRC W2812 LED controller for custom color effects^.
13mm Size: Lightweight design; Each strip carries 4 LEDs; Only 4 strips easily meet competition requirements (16 LEDs total)^; Features RGB LEDs programmable via flight controller/HGLRC W2812 LED controller for custom color effects^.
HGLRC LED MINI (38mm)
Input Voltage: 5V
Dimensions: 38mm * 7.1mm * 5mm
Wire Length: 70mm
Weight: 0.7g (each)
HGLRC LED Lite (25mm)
Input Voltage: 5V
Dimensions: 25mm * 7.1mm * 5mm
Wire Length: 70mm
Weight: 0.65g (each)
Product Name: HGLRC LED LONGXL (13mm)
Input Voltage: 5V
Dimensions: 13.33mm * 4.32mm * 1.9mm
Wire Length: 70mm
Weight: 0.12g (each)
Package Includes (LED Strips):
4x HGLRC LED Strips (size according to order)
4x SH1.03P dual-end 70mm connecting wires
4x Heat shrink tubing
Controller Parameters:
Following the long-standing popularity of the HGLRC W2812 LED Controller board in the FPV community, HGLRC now introduces the upgraded HGLRC LED MINI Controller:
Features one-touch mode switching, eliminating complex computer configuration^.
Equipped with solder pads compatible with all LED connections^.
Offers two soldering modes: Direct connection to 2-6S power or connection to flight controller for Betaflight configuration^.
Added electronic switch function for remote-controlled on/off via settings^.
Smaller size post-upgrade for easier installation^.
Parameters:
HGLRC LED MINI Controller
Input Voltage: 2-6S (7.4-25V)
Dimensions: 17mm * 12.5mm * 6.5mm
Weight: 1.44g (each)
LED Function Buttons:
Short press: Switch colors^.
Hold for 3 seconds: Toggle flash mode ON/OFF (LED indicator remains lit)^.
Flash Modes: Slow flash, Steady on, Cycle, Fast flash^.
Colors: Blue, Red, Green, Yellow^.
Package Includes (Controller):
1x HGLRC LED MINI Controller
4x 30AWG 100mm connecting wires (Red, Black, Yellow, Green)
1x Heat shrink tubing
Manual（scan it to check）
